BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//SESOC - ECPv5.2.0//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:SESOC
X-ORIGINAL-URL:https://www.sesoc.org.nz
X-WR-CALDESC:Events for SESOC
BEGIN:VTIMEZONE
TZID:Pacific/Auckland
BEGIN:STANDARD
TZOFFSETFROM:+1300
TZOFFSETTO:+1200
TZNAME:NZST
DTSTART:20190406T140000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+1200
TZOFFSETTO:+1300
TZNAME:NZDT
DTSTART:20190928T140000
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Pacific/Auckland:20190904T173000
DTEND;TZID=Pacific/Auckland:20190904T190000
DTSTAMP:20260429T230307
CREATED:20190827T003229Z
LAST-MODIFIED:20190827T003229Z
UID:3293-1567618200-1567623600@www.sesoc.org.nz
SUMMARY:ESE Christchurch Technical Session
DESCRIPTION:Upcoming Christchurch ESE technical session: Ductility demands for concrete members and detailing required to accommodate them\, presented by Nic Brooke. \n  \nDate:                   Wednesday 4th September \nTime:                   Social and networking 5:30 – 6:00pm\nPresentation 6:00 – 7:00pm \nLocation:             Beca\nANZ Centre 267 High St \n                             Christchurch CBD \nRSVP:                    Click here \n  \nIn contrast to earlier editions\, New Zealand Standards since the mid-2000s have required ductility demands and consequently required detailing to be checked based on local deformations of individual elements rather than on overall displacements of a complete structure. \nThis presentation will: \n·         Overview why it is important to consider deformation demands at a member\, rather than structure\, level\, \n·         Review the reasons detailing is required in order for reinforced concrete elements to sustain large plastic deformations\, \n·         Explain the basis of the method used by the New Zealand Concrete Structures Standard\, NZS 3101 for quantifying member ductility demands\, and \n·         Demonstrate the application of this method to determine ductility demands for typical elements. \n\n Nicholas Brooke\nPhD\, BE (Hons)\, CPEng\, CMEng \nNic is a consulting engineer and Principal at Compusoft Engineering\, having previously lectured in the Department of Civil & Environmental Engineering at the University of Auckland. He has a broad experience in analysis\, design and research related to reinforced concrete\, including having had extensive involvement in the assessment of earthquake-damaged structures in Christchurch and Wellington.  \nNic is widely involved in the structural engineering community\, being a member of the SESOC Management Committee\, Vice President of the Concrete New Zealand Learned Society\, a member of a number of ongoing research projects including the ReCast Floors collaboration\, and a frequent presenter of industry seminars. Nicholas was also technical editor and chair of the committee responsible for producing the revision for Part C5 of the assessment guidelines that was released in late 2018.
URL:https://www.sesoc.org.nz/event/ese-christchurch-technical-session
LOCATION:Beca Office\, Christchurch\, ANZ Centre - 267 High Street\, Christchurch\, New Zealand
CATEGORIES:Christchurch,Emerging Structural Engineer
END:VEVENT
END:VCALENDAR