BEGIN:VCALENDAR VERSION:2.0 PRODID:-//SESOC - ECPv6.17.4//NONSGML v1.0//EN CALSCALE:GREGORIAN METHOD:PUBLISH X-WR-CALNAME:SESOC X-ORIGINAL-URL:https://www.sesoc.org.nz X-WR-CALDESC:Events for SESOC REFRESH-INTERVAL;VALUE=DURATION:PT1H X-Robots-Tag:noindex X-PUBLISHED-TTL:PT1H BEGIN:VTIMEZONE TZID:Pacific/Auckland BEGIN:STANDARD TZOFFSETFROM:+1300 TZOFFSETTO:+1200 TZNAME:NZST DTSTART:20180331T140000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:+1200 TZOFFSETTO:+1300 TZNAME:NZDT DTSTART:20180929T140000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:+1300 TZOFFSETTO:+1200 TZNAME:NZST DTSTART:20190406T140000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:+1200 TZOFFSETTO:+1300 TZNAME:NZDT DTSTART:20190928T140000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:+1300 TZOFFSETTO:+1200 TZNAME:NZST DTSTART:20200404T140000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:+1200 TZOFFSETTO:+1300 TZNAME:NZDT DTSTART:20200926T140000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:+1300 TZOFFSETTO:+1200 TZNAME:NZST DTSTART:20210403T140000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:+1200 TZOFFSETTO:+1300 TZNAME:NZDT DTSTART:20210925T140000 END:DAYLIGHT BEGIN:STANDARD TZOFFSETFROM:+1300 TZOFFSETTO:+1200 TZNAME:NZST DTSTART:20220402T140000 END:STANDARD BEGIN:DAYLIGHT TZOFFSETFROM:+1200 TZOFFSETTO:+1300 TZNAME:NZDT DTSTART:20220924T140000 END:DAYLIGHT END:VTIMEZONE BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20210225T130000 DTEND;TZID=Pacific/Auckland:20210225T173000 DTSTAMP:20210210T010755Z CREATED:20210120T221701Z LAST-MODIFIED:20210210T010755Z UID:3923-1614258000-1614274200@www.sesoc.org.nz SUMMARY:Design for Durability & Demonstrating Compliance to the Clause B2 Seminar DESCRIPTION: SESOC Seminar Series \nDesign for Durability & Demonstrating Compliance to the Clause B2 – Durability of the Building Code \n Over the years durability design guidance and standards have been published which assist designers with the material selection and durability design of common construction materials. For timber and concrete\, and more recently structural steel\, the Clause B2 – Durability of the NZ Building Code now covers the majority of materials used in structures in the New Zealand environment. \nHowever\, it appears that there are misunderstandings and confusion on how designers can demonstrate compliance with the Durability clause\, which ranges from the selection of corrosion protection systems to ensuring its application within the built environment. This protection needs to be undertaken to the appropriate level of quality to meet the Building Code durability requirements. \nThis seminar will first highlight the requirements of the Clause B2 – Durability\, followed by an overview of the steel durability technical specification SNZ TS 3404\, durability of some other metals used in structural design\, the durability part of the concrete and masonry standards and durability requirements for the timber standard NZS 3604. This includes a discussion on achieving the required durability during construction\, based on the relevant standards\, including the steel fabrication and erection standard AS/NZS 5131\, the concrete construction standard NZS 3109\, the masonry Standard NZS 4230 and associated timber standards and good practice. \nExamples of acceptable solutions\, as well as case studies of when things go wrong will be given together with remedies and good practice and the seminar will conclude with the current status of the relationship between Producer Statements and the B2 Clause\, what to do in that situation and a possible pathway moving forward. \nSeminar Dates \n Christchurch\, Thursday 18 February 2021 \nAuckland\, Tuesday 23 February 2021 \nWellington\, Thursday 25 February 2021 \n To register or for more information click here to download the seminar brochure or contact us on 09 536 5410 or email us info@bluepacificevents.com URL:https://www.sesoc.org.nz/event/design-for-durability-demonstrating-compliance-to-the-clause-b2-seminar-3 CATEGORIES:Seminar,Wellington END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20210223T130000 DTEND;TZID=Pacific/Auckland:20210223T173000 DTSTAMP:20210210T010916Z CREATED:20210120T221548Z LAST-MODIFIED:20210210T010916Z UID:3921-1614085200-1614101400@www.sesoc.org.nz SUMMARY:Design for Durability & Demonstrating Compliance to the Clause B2 Seminar DESCRIPTION: SESOC Seminar Series \nDesign for Durability & Demonstrating Compliance to the Clause B2 – Durability of the Building Code \n Over the years durability design guidance and standards have been published which assist designers with the material selection and durability design of common construction materials. For timber and concrete\, and more recently structural steel\, the Clause B2 – Durability of the NZ Building Code now covers the majority of materials used in structures in the New Zealand environment. \nHowever\, it appears that there are misunderstandings and confusion on how designers can demonstrate compliance with the Durability clause\, which ranges from the selection of corrosion protection systems to ensuring its application within the built environment. This protection needs to be undertaken to the appropriate level of quality to meet the Building Code durability requirements. \nThis seminar will first highlight the requirements of the Clause B2 – Durability\, followed by an overview of the steel durability technical specification SNZ TS 3404\, durability of some other metals used in structural design\, the durability part of the concrete and masonry standards and durability requirements for the timber standard NZS 3604. This includes a discussion on achieving the required durability during construction\, based on the relevant standards\, including the steel fabrication and erection standard AS/NZS 5131\, the concrete construction standard NZS 3109\, the masonry Standard NZS 4230 and associated timber standards and good practice. \nExamples of acceptable solutions\, as well as case studies of when things go wrong will be given together with remedies and good practice and the seminar will conclude with the current status of the relationship between Producer Statements and the B2 Clause\, what to do in that situation and a possible pathway moving forward. \nSeminar Dates \n Christchurch\, Thursday 18 February 2021 \nAuckland\, Tuesday 23 February 2021 \nWellington\, Thursday 25 February 2021 \n To register or for more information click here to download the seminar brochure or contact us on 09 536 5410 or email us info@bluepacificevents.com URL:https://www.sesoc.org.nz/event/design-for-durability-demonstrating-compliance-to-the-clause-b2-seminar-2 CATEGORIES:Auckland,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20210218T130000 DTEND;TZID=Pacific/Auckland:20210218T173000 DTSTAMP:20210210T011000Z CREATED:20210120T221348Z LAST-MODIFIED:20210210T011000Z UID:3918-1613653200-1613669400@www.sesoc.org.nz SUMMARY:Design for Durability & Demonstrating Compliance to the Clause B2 Seminar DESCRIPTION: SESOC Seminar Series \nDesign for Durability & Demonstrating Compliance to the Clause B2 – Durability of the Building Code \n Over the years durability design guidance and standards have been published which assist designers with the material selection and durability design of common construction materials. For timber and concrete\, and more recently structural steel\, the Clause B2 – Durability of the NZ Building Code now covers the majority of materials used in structures in the New Zealand environment. \nHowever\, it appears that there are misunderstandings and confusion on how designers can demonstrate compliance with the Durability clause\, which ranges from the selection of corrosion protection systems to ensuring its application within the built environment. This protection needs to be undertaken to the appropriate level of quality to meet the Building Code durability requirements. \nThis seminar will first highlight the requirements of the Clause B2 – Durability\, followed by an overview of the steel durability technical specification SNZ TS 3404\, durability of some other metals used in structural design\, the durability part of the concrete and masonry standards and durability requirements for the timber standard NZS 3604. This includes a discussion on achieving the required durability during construction\, based on the relevant standards\, including the steel fabrication and erection standard AS/NZS 5131\, the concrete construction standard NZS 3109\, the masonry Standard NZS 4230 and associated timber standards and good practice. \nExamples of acceptable solutions\, as well as case studies of when things go wrong will be given together with remedies and good practice and the seminar will conclude with the current status of the relationship between Producer Statements and the B2 Clause\, what to do in that situation and a possible pathway moving forward. \nSeminar Dates \n Christchurch\, Thursday 18 February 2021 \nAuckland\, Tuesday 23 February 2021 \nWellington\, Thursday 25 February 2021 \n To register or for more information click here to download the seminar brochure or contact us on 09 536 5410 or email us info@bluepacificevents.com URL:https://www.sesoc.org.nz/event/design-for-durability-demonstrating-compliance-to-the-clause-b2-seminar CATEGORIES:Christchurch,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20201027T160000 DTEND;TZID=Pacific/Auckland:20201027T173000 DTSTAMP:20201019T050154Z CREATED:20201019T050154Z LAST-MODIFIED:20201019T050154Z UID:3762-1603814400-1603819800@www.sesoc.org.nz SUMMARY:President Road Show 4 DESCRIPTION:This year the annual Sesoc President’s Roadshow will be provided via a series of four webinars at the following times \n\nMonday 19th October\, 12:30 – 2pm\nTuesday 20th October\, 4 – 5:30pm\nThursday 22nd October\, 12:30 – 2pm\nTuesday 27th October\, 4 – 5:30pm\n\n  \nHamish McKenzie\, SESOC President will be providing an update of SESOC initiatives and activity – with an opportunity for online Q&A to Hamish and other members of the SESOC Management Committee as part of the event. The event provides an opportunity to understand the significant range of activity that SESOC are involved with as well as an opportunity to debate some of the topical issues within our profession. \n  \nThe four events will be identical – with the options intended to provide a flexible timeslot that suits all members.  We welcome your attendance to one of these events and ask that you pre-register via the Engineering NZ website: \n  \nhttps://www.engineeringnz.org/courses-events/event/sesoc-presidents-roadshow/ URL:https://www.sesoc.org.nz/event/president-road-show-4 CATEGORIES:Auckland,Christchurch,Conference,Dunedin,Hamilton,Meeting,Nelson,Seminar,Tauranga,Wellington,Workshop END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20201022T123000 DTEND;TZID=Pacific/Auckland:20201022T140000 DTSTAMP:20201019T050056Z CREATED:20201019T050056Z LAST-MODIFIED:20201019T050056Z UID:3760-1603369800-1603375200@www.sesoc.org.nz SUMMARY:President Road Show 3 DESCRIPTION:This year the annual Sesoc President’s Roadshow will be provided via a series of four webinars at the following times \n\nMonday 19th October\, 12:30 – 2pm\nTuesday 20th October\, 4 – 5:30pm\nThursday 22nd October\, 12:30 – 2pm\nTuesday 27th October\, 4 – 5:30pm\n\n  \nHamish McKenzie\, SESOC President will be providing an update of SESOC initiatives and activity – with an opportunity for online Q&A to Hamish and other members of the SESOC Management Committee as part of the event. The event provides an opportunity to understand the significant range of activity that SESOC are involved with as well as an opportunity to debate some of the topical issues within our profession. \n  \nThe four events will be identical – with the options intended to provide a flexible timeslot that suits all members.  We welcome your attendance to one of these events and ask that you pre-register via the Engineering NZ website: \n  \nhttps://www.engineeringnz.org/courses-events/event/sesoc-presidents-roadshow/ URL:https://www.sesoc.org.nz/event/president-road-show-3 END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20201020T160000 DTEND;TZID=Pacific/Auckland:20201020T173000 DTSTAMP:20201019T045956Z CREATED:20201019T045956Z LAST-MODIFIED:20201019T045956Z UID:3758-1603209600-1603215000@www.sesoc.org.nz SUMMARY:President Road Show 2 DESCRIPTION:This year the annual Sesoc President’s Roadshow will be provided via a series of four webinars at the following times \n\nMonday 19th October\, 12:30 – 2pm\nTuesday 20th October\, 4 – 5:30pm\nThursday 22nd October\, 12:30 – 2pm\nTuesday 27th October\, 4 – 5:30pm\n\nHamish McKenzie\, SESOC President will be providing an update of SESOC initiatives and activity – with an opportunity for online Q&A to Hamish and other members of the SESOC Management Committee as part of the event. The event provides an opportunity to understand the significant range of activity that SESOC are involved with as well as an opportunity to debate some of the topical issues within our profession. \nThe four events will be identical – with the options intended to provide a flexible timeslot that suits all members.  We welcome your attendance to one of these events and ask that you pre-register via the Engineering NZ website: \nhttps://www.engineeringnz.org/courses-events/event/sesoc-presidents-roadshow/ URL:https://www.sesoc.org.nz/event/president-road-show-2 CATEGORIES:Auckland,Christchurch,Dunedin,Hamilton,Meeting,Nelson,Seminar,Tauranga,Wellington,Workshop END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20201019T123000 DTEND;TZID=Pacific/Auckland:20201019T140000 DTSTAMP:20201019T045758Z CREATED:20201019T045758Z LAST-MODIFIED:20201019T045758Z UID:3756-1603110600-1603116000@www.sesoc.org.nz SUMMARY:President Road show DESCRIPTION:This year the annual Sesoc President’s Roadshow will be provided via a series of four webinars at the following times \n\nMonday 19th October\, 12:30 – 2pm\nTuesday 20th October\, 4 – 5:30pm\nThursday 22nd October\, 12:30 – 2pm\nTuesday 27th October\, 4 – 5:30pm\n\nHamish McKenzie\, SESOC President will be providing an update of SESOC initiatives and activity – with an opportunity for online Q&A to Hamish and other members of the SESOC Management Committee as part of the event. The event provides an opportunity to understand the significant range of activity that SESOC are involved with as well as an opportunity to debate some of the topical issues within our profession. \nThe four events will be identical – with the options intended to provide a flexible timeslot that suits all members.  We welcome your attendance to one of these events and ask that you pre-register via the Engineering NZ website: \nhttps://www.engineeringnz.org/courses-events/event/sesoc-presidents-roadshow/ URL:https://www.sesoc.org.nz/event/president-road-show CATEGORIES:Auckland,Christchurch,Dunedin,Emerging Structural Engineer,Hamilton,Meeting,Nelson,Seminar,Tauranga,Wellington END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20191114T173000 DTEND;TZID=Pacific/Auckland:20191114T193000 DTSTAMP:20191111T000603Z CREATED:20191111T000603Z LAST-MODIFIED:20191111T000603Z UID:3332-1573752600-1573759800@www.sesoc.org.nz SUMMARY:SESOC Emerging Structural Engineers Presents: The relationship between the Architect and the Engineer DESCRIPTION:SESOC Emerging Structural Engineers – Auckland presentation\nThe relationship between the Architect and the Engineer\nThursday 14th November\, networking from 5:30pm\, Presentation at 6pm \nBECA Auditorium\, 21 Pitt Street\, Auckland \nRSVP HERE \n  \nThe SESOC Emerging Structural Engineers network is excited to advertise The Integrated Design Series\, a series of presentations from disciplines that structural engineers regularly collaborate with in the design process. The second of these presentations in Auckland will be by Bruce Curtain\, Head of Architecture at WSP on ‘the relationship between the architect and the engineer’. \nIn this presentation Bruce will present a case study – City Hall\, the iconic headquarters for the Mayor of London and Greater London Authority. Designed by Foster + Partners and Arup the combined team utilised leading edge design and construction techniques that integrate architecture\, structure and services to create a truly unique building. Bruce was an architect on this project and will explore his relationship with the structural engineers and wider project team to realise this geometrically complex hall into built form. \nThere will be an opportunity for networking from 5:30pm\, the presentation will start at 6:00pm\, followed by drinks and pizza. \nBruce Curtain: Head of Architecture & Principal Architect at WSP in NZ\n \nBBSc\, BArch (Hons)\, NZIA\, RIBA \nBruce has 27 years’ experience leading a range of complex architectural projects in both NZ and the UK across market sectors of education\, commercial – including London’s iconic ‘City Hall’ building\, and large scale airport redevelopments at Heathrow and Stansted. \nHis recent experience in major structural projects includes the 5 year programme for seismic strengthening of the 28 Storey Majestic Centre tower in Wellington\, and strengthening to a Category 1 heritage building at Wellington East Girls College. \nHe also acts as an advisor to government agencies such as MBIE representing professional and technical societies focusing on topics such as the future of the Building Code\, low-damage/ resilient design guidance development\, non-structural element performance\, passive fire protection and ACP cladding.  He is also the WSP representative on the NZIA major practice group\, and as a committee member of the NZ Society of Earthquake Engineers supporting cross discipline collaboration. \nPlease RSVP with the link below: \nhttps://forms.gle/JKhoAnZ5aeT7Rpdi9 URL:https://www.sesoc.org.nz/event/sesoc-emerging-structural-engineers-presents-the-relationship-between-the-architect-and-the-engineer LOCATION:Beca office\, 21 Pitt Street\, 21 Pitt Street\, Auckland\, New Zealand CATEGORIES:Auckland,Emerging Structural Engineer END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20191023T173000 DTEND;TZID=Pacific/Auckland:20191023T193000 DTSTAMP:20191016T212020Z CREATED:20191016T212020Z LAST-MODIFIED:20191016T212020Z UID:3324-1571851800-1571859000@www.sesoc.org.nz SUMMARY:ESE - SESOC Conference Roadshow DESCRIPTION:SESOC Emerging Structural Engineers – Conference Roadshow \nWhen: Wednesday 23rd October  5.30pm for a 6pm start \nWhere: Beca\, ANZ Centre\, 267 High Street\, Christchurch \nRSVP: HERE \nFollowing the SESOC Conference in August\, the Emerging Structural Engineers Network in Christchurch is bringing you a Conference Roadshow. This event is a chance to hear some of the key issues that were raised throughout the conference proceedings\, and learn more from some of the ESE presenters on what was involved. \nThe theme of the conference was “Challenging the Profession”\, and many of the speakers did just that! The roadshow will feature some presentations from the ESE conference stream\, a summary of some of the key themes shared throughout the conference\, and a presentation from keynote speaker John Hare. \nAs usual\, there will be food and drinks after the presentations. This will also be a great chance to pick the brains of those who have presented and get some inspiration for the next conference in 2021. \n  \nOur three ESE presenters are: \nMichael Simcock – Michael is a structural engineer with three years of formal experience working for Calibre Consulting in Christchurch. His prior experience includes many weekends spent working in the Christchurch Red Zone\, undertaking post-earthquake damage inspection\, site pre-pours\, and nine years of shallow-soils geotechnical testing experience.\nMichael’s paper is on the topic of Proactive Decision Making as a Graduate Engineer \nCharlotte Corston – Charlotte has worked as a structural engineer at BMC since graduating in 2016. During her time at BMC she has undertaken many earthquake assessments and new builds\, and is particularly passionate about heritage engineering.\nCharlotte’s paper uses the case study of the strengthening of the former Chief Post Office Building in Christchurch’s Cathedral Square to look at the workings of a project team. \nBen Westeneng – Ben is a structural engineer with three years of experience in structural design and seismic assessment in New Zealand. He also has a Master of Earthquake Engineering which investigated the buckling of gusset plates in BRB frames. His paper looked at the automation of seismic assessment of unreinforced masonry buildings. Ben won the SESOC ESE scholarship with this paper\, and attended the SEAOC Conference in California to present the paper there. \n  \n  \n \nKeynote presenter John Hare \nJohn Hare is a structural engineer and Chief Executive of Holmes Group\, with experience working in NZ\, the UK and the US. He is a Fellow of Engineering New Zealand and NZSEE\, and a life member and past president of SESOC. John sits on a number of advisory groups\, including the steering group for the Assessment Guidelines. \nThroughout his career\, John has had extensive experience in both the design of new structures and in the assessment and strengthening of existing buildings. Following the 2011 Christchurch earthquake\, he was seconded as Principal Engineering Adviser\, firstly to Civil Defence and subsequently to the Canterbury Earthquakes Recovery Authority. \n  \nJohn’s keynote address was on the theme of Challenging our views of Seismic Risk\, and whether our established practices are still fit for purpose. \nAt the SESOC Conference this year he was awarded the SESOC President’s Award for his outstanding contribution to the New Zealand Structural Engineering profession. URL:https://www.sesoc.org.nz/event/ese-sesoc-conference-roadshow LOCATION:Beca Office\, Christchurch\, ANZ Centre - 267 High Street\, Christchurch\, New Zealand CATEGORIES:Christchurch,Emerging Structural Engineer END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20191014T173000 DTEND;TZID=Pacific/Auckland:20191014T200000 DTSTAMP:20190829T090245Z CREATED:20190710T011306Z LAST-MODIFIED:20190829T090245Z UID:3208-1571074200-1571083200@www.sesoc.org.nz SUMMARY:SESOC Emerging Structural Engineers Auckland DESCRIPTION:SESOC ESE Presents:\nDuctility demands for concrete members and detailing required to accommodate them\nIn contrast to earlier editions\, New Zealand Standards since the mid-2000s have required ductility demands and consequently required detailing to be checked based on local deformations of individual elements rather than on overall displacements of a complete structure. \nThis presentation will: \n·         Overview why it is important to consider deformation demands at a member\, rather than structure\, level\, \n·         Review the reasons detailing is required in order for reinforced concrete elements to sustain large plastic deformations\, \n·         Explain the basis of the method used by the New Zealand Concrete Structures Standard\, NZS 3101 for quantifying member ductility demands\, and \n·         Demonstrate the application of this method to determine ductility demands for typical elements. \nNicholas Brooke\nPhD\, BE (Hons)\, CPEng\, CMEng \nNic is a consulting engineer and Principal at Compusoft Engineering\, having previously lectured in the Department of Civil & Environmental Engineering at the University of Auckland. He has a broad experience in analysis\, design and research related to reinforced concrete\, including having had extensive involvement in the assessment of earthquake-damaged structures in Christchurch and Wellington. \nNic is widely involved in the structural engineering community\, being a member of the SESOC Management Committee\, Vice President of the Concrete New Zealand Learned Society\, a member of a number of ongoing research projects including the ReCast Floors collaboration\, and a frequent presenter of industry seminars. Nicholas was also technical editor and chair of the committee responsible for producing the revision for Part C5 of the assessment guidelines that was released in late 2018. URL:https://www.sesoc.org.nz/event/sesoc-emerging-structural-engineers-auckland LOCATION:1.401 Faulty of Engineering\, University of Auckland\, 20 Symonds Street\, Auckland\, New Zealand CATEGORIES:Auckland,Emerging Structural Engineer END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20191010T173000 DTEND;TZID=Pacific/Auckland:20191010T193000 DTSTAMP:20190930T023725Z CREATED:20190930T023725Z LAST-MODIFIED:20190930T023725Z UID:3313-1570728600-1570735800@www.sesoc.org.nz SUMMARY:ESE - Waikato Launch “Things I Learnt the Hard Way” DESCRIPTION:SESOC Emerging Structural Engineers Network – Waikato Launch – “Things I Learnt the Hard Way” \nThursday 10th of October \n5.30pm Tea/Coffee \n6.00pm Presentation Start \n7:00pm Nibbles/Drinks \n  \nAECOM\, 121 Rostrevor St\, Hamilton \n  \nSESOC is excited to announce the launch of the Emerging Structural Engineers Network. The Waikato launch will be held on the 10th of October and features a panel of speakers who are each undoubtedly leaders in the structural engineering industry. Whether it be technical challenges in design or construction projects\, building relationships with clients and colleagues or the development of professional skills\, the transition from university student to professional engineer can be tough – come and learn from the experiences of those that have been there as our panellists share their “things I learnt the hard way”. \n  \nThe event is held in partnership with Young Engineers Waikato and AECOM. \n  \nOur panellists are: \n  \nAlex Vindel – Alex Vindel is Hamilton Structures Team Leader for AECOM NZ and has 16 years of experience working as a consulting structural engineer. Alex obtained a BEng Hons degree in Aerospace Engineering but transitioned into Structures with his first ‘proper’ job for a small structural civil consultancy in the UK. After five years Alex moved to AECOM UK and quickly gained experience in a diverse range of projects\, sectors and contractual arrangements. During his time in the UK\, Alex had significant roles in delivering projects in both traditional and modular forms of construction for the Ministry of Defence\, refurbishment of grade listed historical buildings\, design optioneering for Clapham Junction train station upgrade and design of airside ancillary buildings at Heathrow airport to name a few select projects. In 2016 Alex moved to Hamilton and as team lead has been responsible for both the management and technical delivery of projects in the Waikato and Bay of Plenty region. \n  \nDaniel Moore – Daniel joined Holmes Consulting in 2011\, making the move south to Hamilton from Auckland to become the Hamilton office Business Manager. Daniel has 10 years of design experience and 15 years in the industry. His project experience has included bulk retail\, industrial developments and retail complexes. Daniel enjoys building lasting relationships with clients and members of the design team during a project and sharing in the reward of a successful project. On many of his projects\, Daniel and his team have been the Lead Consultant responsible for developing the overall building and site layout and developing the architectural\, structural and civil components. Through his role as Lead Consultant (and Engineer to Contract) he has developed an extensive understanding of how buildings go together and the significant ongoing influence they can have on the businesses and communities they support. \n  \nJohn Warrington – John is a Principal Geotechnical Engineer with WSP Opus\, based in their Hamilton Office\, and holds both CPEng and CEng registrations with Engineering New Zealand and the Institution of Civil Engineers in the UK. John has experience across a broad range of Civil Engineering disciplines having been involved in the design of cooling water systems for power stations\, geotechnical feasibility studies for nuclear and gas fired power stations\, design of small-scale hydro-electric schemes and the management of geotechnical input to light rail projects amongst others. John has worked for both consultancies and client organisations and as a result has developed a good understanding of the requirement for strong and open relationships between all parties involved in order to ensure the successful delivery of projects. Since moving to NZ in 2011\, the differing engineering challenges presented in the country has demonstrated that one is never too old to learn and broaden ones’ experience. \n  \nRSVP link: \nhttps://forms.gle/ASj6m8hsA1fKspKY7 URL:https://www.sesoc.org.nz/event/ese-waikato-launch-things-i-learnt-the-hard-way LOCATION:AECOM\, Hamilton\, 121 Rostrevor Street\, Hamilton\, New Zealand CATEGORIES:Emerging Structural Engineer,Hamilton END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190912T173000 DTEND;TZID=Pacific/Auckland:20190912T200000 DTSTAMP:20190827T002851Z CREATED:20190827T002233Z LAST-MODIFIED:20190827T002851Z UID:3283-1568309400-1568318400@www.sesoc.org.nz SUMMARY:ESE Kick off event in Nelson DESCRIPTION:A Structural Engineer\, a Civil Engineer\, and a Geotechnical Engineer walked into a bar… \n  \nNo\, it’s not a joke!  Nelson’s Emerging Structural Engineers SESOC kick-off event is finally here\, and\, in collaboration with Engineering New Zealand and NZ Geotechnical Society\, we present “Things I learnt the hard way”.  \n  \nThree speakers will be sharing their experiences\, whether it bad or good\, since they joined the engineering profession.  Come along\, bring your colleagues\, enjoy some drinks and nibbles\, and maybe learn from someone else’s mistakes (or successes).  \n Please RSVP at \nhttps://forms.gle/MDZAtMDF2yq6Kbo1A URL:https://www.sesoc.org.nz/event/ese-kick-off-event-in-nelson LOCATION:Beca Office\, Nelson\, 191 Trafalgar Street\, Nelson\, New Zealand CATEGORIES:Emerging Structural Engineer,Nelson END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190911T173000 DTEND;TZID=Pacific/Auckland:20190911T200000 DTSTAMP:20190902T061349Z CREATED:20190902T061349Z LAST-MODIFIED:20190902T061349Z UID:3300-1568223000-1568232000@www.sesoc.org.nz SUMMARY:ESE Auckland - Fire Engineering for Structural Engineers DESCRIPTION:SESOC Emerging Structural Engineers Network Auckland – \n“Fire Engineering for Structural Engineers” \n  \nWednesday 11th September \nNetworking from 5.30pm \nPresentation Starts at 6pm followed by food and drinks \n  \nUniversity of Auckland\, Faculty of Science Building\, Room 302-G20 \nSESOC Emerging Structural Engineers (ESE) Network are proud to present the first presentation as part of our new initiative; The Integrated Design Series. This will provide a series of presentations from different consultants that structural engineers regularly collaborate with throughout the design process. The first of these presentations in Auckland will be led by Martin Feeney of Holmes Fire on ‘Fire Engineering for Structural Engineers’. Keep an eye out for similar presentations being rolled out throughout New Zealand in the near future. \n  \nIn this presentation Martin will describe the key effects of fire on steel\, concrete and timber structures and how structural engineers can effectively work together with fire engineers to ensure economical solutions. With structural steel and heavy timber becoming more widely used\, it’s increasingly important to understand the impact of fire on structures and how this integrates with structural design to provide effective and coordinated solutions to maintain structural stability during a fire. \n  \nIf you are planning on attending\, please RSVP using the link below: \nRSVP Link \n  \nMartin Feeney BE(Civil)\, MEFireE \nPrincipal\, Holmes Fire \nMartin Feeney practised as a structural engineer with Holmes Consulting Group for more than 20 years. After two years on secondment to HERA\, specialising in analysis and design of steel structures in earthquake and fire he started the Auckland office of the international consulting fire engineering firm Holmes Fire where he is a Principal and Senior Fire Engineer. \nHe is passionate about performance-based design generally and has developed expertise in performance-based fire safety design for a wide range of building types. His special interest is assessing performance of structures when exposed to fire. He has carried out designs on projects in New Zealand\, Australia\, Spain\, California and New York to establish appropriate performance-based solutions for the fire performance of steel structures. URL:https://www.sesoc.org.nz/event/ese-auckland-fire-engineering-for-structural-engineers LOCATION:302-G20\, Faculty of Science\, The University of Auckland\, 23 Symonds Street\, Auckland\, 1010\, New Zealand CATEGORIES:Auckland,Emerging Structural Engineer END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190911T173000 DTEND;TZID=Pacific/Auckland:20190911T200000 DTSTAMP:20190827T002806Z CREATED:20190827T002806Z LAST-MODIFIED:20190827T002806Z UID:3287-1568223000-1568232000@www.sesoc.org.nz SUMMARY:ESE Dunedin Launch "Things I learnt the hard way" DESCRIPTION:SESOC Emerging Structural Engineers Network – Dunedin Launch – “Things I learnt the hard way” \nWednesday 11th September \nFood and drinks from 5.30pm \nPresentations will begin at 6.15pm \n  \nOpus House – 197 Rattray Street\, Dunedin \n  \nRSVP at  \nhttps://forms.gle/zKF4nkyr7peT3wz39 \n  \nSESOC is excited to announce the launch of the Emerging Structural Engineers Network in Dunedin. \n  \nThe launch will be held on the 11th of September and features a panel of speakers who each have a wealth of knowledge and experiences in the structural engineering industry. Whether it be technical challenges in design or construction projects\, building relationships with clients and colleagues or the development of professional skills\, the transition from university student to professional engineer can be tough – come and learn from the experiences of those that have been there as our panellists share “things I learnt the hard way”. \n  \nThis will be a fantastic opportunity to meet and network with fellow\, like-minded structural engineers working in Dunedin. \n  \nOur three panellists are: \n  \nAdam Moffat \nAdam is a structural engineer at Beca\, and has worked in Christchurch\, London and Dunedin over the last 13 years. He has worked primarily on commercial and institutional projects for clients such as Christchurch Airport\, University of Canterbury and University of Otago. He has spent a lot of time on construction sites\, which are fertile grounds for hard lessons. He also worked in Christchurch during and after the earthquakes\, which has shaped his approach to structural engineering \n  \nEvelyn Guiguet \nEvelyn is originally from Argentina where she completed her degree in Civil/Structural Engineering. Evelyn came to New Zealand in 2015 and worked in Canterbury until she joined Calibre in 2018. She particularly enjoys seismic engineering but likes to have a variety of projects on the go including bridge design. Evelyn recently had the chance to work on the Sea to Shore Tokelau wharf project. \n  \nIan Walsh \nIan has over 40 years of infrastructure sector experience with civil and hydraulic structures. His early MWD experience in bridge design then to irrigation development resulted in his first dam using concrete faced rockfill construction at Loganburn. Subsequent investigation roles for major Hydro Electric Development Proposals reinforced this interest and eventually led to further studies in Geotechnical and Dam Engineering in Australia and a short period getting up to speed with advances in constitutive modelling at Imperial College London. Ian’s design and peer review interests in recent years has focussed upon dam safety management and renewable energy developments involving Hydropower and Wind Energy. Ian is also active on major transportation projects promoting and advising on risk management and undertaking Engineer to Contract roles. \n  \n  URL:https://www.sesoc.org.nz/event/ese-dunedin-launch-things-i-learnt-the-hard-way LOCATION:Opus House\, Dunedin\, 197 Rattray Street\, Dunedin\, New Zealand CATEGORIES:Dunedin,Emerging Structural Engineer END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190904T173000 DTEND;TZID=Pacific/Auckland:20190904T190000 DTSTAMP:20190827T003229Z CREATED:20190827T003229Z LAST-MODIFIED:20190827T003229Z UID:3293-1567618200-1567623600@www.sesoc.org.nz SUMMARY:ESE Christchurch Technical Session DESCRIPTION:Upcoming Christchurch ESE technical session: Ductility demands for concrete members and detailing required to accommodate them\, presented by Nic Brooke. \n  \nDate:                   Wednesday 4th September \nTime:                   Social and networking 5:30 – 6:00pm\nPresentation 6:00 – 7:00pm \nLocation:             Beca\nANZ Centre 267 High St \n                             Christchurch CBD \nRSVP:                    Click here \n  \nIn contrast to earlier editions\, New Zealand Standards since the mid-2000s have required ductility demands and consequently required detailing to be checked based on local deformations of individual elements rather than on overall displacements of a complete structure. \nThis presentation will: \n·         Overview why it is important to consider deformation demands at a member\, rather than structure\, level\, \n·         Review the reasons detailing is required in order for reinforced concrete elements to sustain large plastic deformations\, \n·         Explain the basis of the method used by the New Zealand Concrete Structures Standard\, NZS 3101 for quantifying member ductility demands\, and \n·         Demonstrate the application of this method to determine ductility demands for typical elements. \n\n Nicholas Brooke\nPhD\, BE (Hons)\, CPEng\, CMEng \nNic is a consulting engineer and Principal at Compusoft Engineering\, having previously lectured in the Department of Civil & Environmental Engineering at the University of Auckland. He has a broad experience in analysis\, design and research related to reinforced concrete\, including having had extensive involvement in the assessment of earthquake-damaged structures in Christchurch and Wellington. \nNic is widely involved in the structural engineering community\, being a member of the SESOC Management Committee\, Vice President of the Concrete New Zealand Learned Society\, a member of a number of ongoing research projects including the ReCast Floors collaboration\, and a frequent presenter of industry seminars. Nicholas was also technical editor and chair of the committee responsible for producing the revision for Part C5 of the assessment guidelines that was released in late 2018. URL:https://www.sesoc.org.nz/event/ese-christchurch-technical-session LOCATION:Beca Office\, Christchurch\, ANZ Centre - 267 High Street\, Christchurch\, New Zealand CATEGORIES:Christchurch,Emerging Structural Engineer END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190826T173000 DTEND;TZID=Pacific/Auckland:20190826T190000 DTSTAMP:20190710T010543Z CREATED:20190710T010543Z LAST-MODIFIED:20190710T010543Z UID:3205-1566840600-1566846000@www.sesoc.org.nz SUMMARY:SESOC Emerging Structural Engineers Wellington DESCRIPTION:SESOC ESE Presents:\nDuctility demands for concrete members and detailing required to accommodate them\nIn contrast to earlier editions\, New Zealand Standards since the mid-2000s have required ductility demands and consequently required detailing to be checked based on local deformations of individual elements rather than on overall displacements of a complete structure. \nThis presentation will: \n·         Overview why it is important to consider deformation demands at a member\, rather than structure\, level\, \n·         Review the reasons detailing is required in order for reinforced concrete elements to sustain large plastic deformations\, \n·         Explain the basis of the method used by the New Zealand Concrete Structures Standard\, NZS 3101 for quantifying member ductility demands\, and \n·         Demonstrate the application of this method to determine ductility demands for typical elements. \nNicholas Brooke\nPhD\, BE (Hons)\, CPEng\, CMEng \nNic is a consulting engineer and Principal at Compusoft Engineering\, having previously lectured in the Department of Civil & Environmental Engineering at the University of Auckland. He has a broad experience in analysis\, design and research related to reinforced concrete\, including having had extensive involvement in the assessment of earthquake-damaged structures in Christchurch and Wellington. \nNic is widely involved in the structural engineering community\, being a member of the SESOC Management Committee\, Vice President of the Concrete New Zealand Learned Society\, a member of a number of ongoing research projects including the ReCast Floors collaboration\, and a frequent presenter of industry seminars. Nicholas was also technical editor and chair of the committee responsible for producing the revision for Part C5 of the assessment guidelines that was released in late 2018. URL:https://www.sesoc.org.nz/event/sesoc-emerging-structural-engineers-wellington LOCATION:Engineering NZ\, L6 NEC House\, 40 Taranaki Street\, Wellington\, New Zealand CATEGORIES:Emerging Structural Engineer,Wellington END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190818T080000 DTEND;TZID=Pacific/Auckland:20190820T170000 DTSTAMP:20190321T094736Z CREATED:20190321T094736Z LAST-MODIFIED:20190321T094736Z UID:3069-1566115200-1566320400@www.sesoc.org.nz SUMMARY:2019 SESOC Conference DESCRIPTION:SESOC is excited to be hosting another high-quality conference for structural engineers and those with an interest in the built environment. \nThe theme of this year’s conference is “Challenging the Profession”\, and we have designed a programme to enable you to meet with fellow professionals and to engage in stimulating interactive debate on issues that matter to you. \nThe conference will bring together professionals from a broad range of disciplines\, including architecture\, business\, public policy\, emergency response planning\, regulation\, and the legal profession. \nORGANISING COMMITTEE \nConference Chair \nCarl Ashby \nPhone +64 4 471 7000 \nEmail carl.ashby@wsp-opus.co.nz \n  \nTechnical Programme \nNamir Amso \nPhone +64 9 442 5556 \nEmail namso@xtra.co.nz \n  \nJason Ingham \nPhone +64 9 923 7803 \nEmail j.ingham@auckland.ac.nz \n  \nHamish McKenzie \nPhone +64 4 471 2292 \nEmail HamishM@holmesgroup.com \n  \nJaden Whiunui \nPhone +64 3 548 8259 \nEmail Jaden@cgwl.co.nz \n  \nConference Coordinator & Logistics \nAllan Bluett of Blue Pacific Event Management Ltd \nPhone 09 536 5410 \nEmail allan@bluepacificevents.com URL:https://www.sesoc.org.nz/event/2019-sesoc-conference LOCATION:SkyCity Convention Centre\, 88 Federal Street\, Auckland\, 1010\, New Zealand CATEGORIES:Auckland,Conference END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190514T173000 DTEND;TZID=Pacific/Auckland:20190514T193000 DTSTAMP:20190506T220054Z CREATED:20190506T220036Z LAST-MODIFIED:20190506T220054Z UID:3132-1557855000-1557862200@www.sesoc.org.nz SUMMARY:SESOC Emerging Structural Engineers Network – Wellington Launch “Things I learnt the hard way” DESCRIPTION:SESOC is excited to announce the Wellington launch of the Emerging Structural Engineers Network. \nThis follows successful launch events held in Auckland and Christchurch. \nTuesday 14 May 2019\nOpus Presentation Room – Level 10\, Majestic Centre\, 100 Willis St\, Wellington \nThere will be an opportunity for networking with pizza and drinks from 5.30pm\, the presentations will start at 6pm.  \nWe’re fortunate to have four leaders in the structural engineering industry sharing on “things I learnt the hard way”. Whether it be technical challenges in design or construction projects\, building relationships with clients and colleagues or the development of professional skills\, the transition from university student to professional engineer can be tough – come and learn from the experiences of those that have been there. \nOur four panellists are: \nAnna Philpot \nAnna graduated from Canterbury University with a BE(Hons) in 2010 and started work at Holmes Consulting in Wellington two weeks before the February earthquake in Christchurch. While a large part of the New Zealand structural engineering sector focused on the Christchurch aftermath and rebuild\, Wellington building owners and tenants initiated a more urgent and focused review of the seismic performance of their properties. This lead to opportunities for Anna to work on several interesting and challenging projects including The Majestic Centre\, Wellington Railway Station\, Wellington Museum and Wellington Town Hall. The challenges presented by these projects often required unique approaches and solutions and were fantastic for developing Anna’s engineering fundamentals and problem solving skills. \nSteve Kemp\nSteve is a Technical Director with Beca\, focussing on buildings and more recently airport terminal buildings.  Steve spent his early career in the UK working in both private and public sectors.  In 2007\, he moved to New Zealand to take a position with Beca as a senior structural engineer.  Projects included a variety of sectors such as power generation\, schools and rail. Steve returned to the UK briefly to lead a structural engineering regional office and was responsible for finding and winning work as well as delivering it.  Returning to New Zealand in 2014\, Steve has led a number of projects\, most with an aviation focus\, such as the terminal south extension project at Wellington Airport. \nSusan Temple\nSusan graduated from Bradford University in the UK with MEng\, and worked for a small consultant Engineering firm before making the switch to main contracting. For the following 4 years\, she was the Structural Engineer for their in-house design department\, before coming to New Zealand in 2005. Susan is an integral part of the on-site and pre-construction team at Hawkins where she carries out all temporary works designs and reviews\, develops and manages construction programmes and methodologies\, carries out coordination reviews to pre-empt site problems\, and ensures structural and civil QA processes are implemented and controlled. Susan’s roles at Hawkins have included Temp Works Engineer for the Supreme Court\, (Construction) Project Manager in Vanuatu\, and now Senior Engineer. She has recently undertaken a series of nationwide presentations with SARNZ\, WorkSafe and the TWf regarding scaffold design and installation. \nPaul Campbell\nPaul is a Technical Leader for WSP Opus\, and a Past-President and life member of the Structural Engineering Society of New Zealand (SESOC). Paul is passionate about structural engineering and believes that we need strong advocacy and leadership in the profession. His focus is giving structural engineers the tools and support they need to practice their profession.  After the Canterbury Earthquake sequence of 2010 and 2011 Paul held various technical and leadership roles seconded within Christchurch City Council\, Civil Defence and the Canterbury Earthquake Recovery Authority (CERA). Subsequent to the earthquakes he has given evidence at the Canterbury Earthquake Royal Commission\, put submissions to the New Zealand Government on Earthquake legislative matters and spent time working on improving the resilience and preparedness of New Zealand to respond to the next big event.  \nThe event is free but registration is essential\, Please RSVP below by Friday 10 May.  URL:https://www.sesoc.org.nz/event/sesoc-emerging-structural-engineers-network-wellington-launch-things-i-learnt-the-hard-way LOCATION:WSP Opus Presentation Room\, Level 10\, 100 Willis Street\, Wellington\, New Zealand CATEGORIES:Emerging Structural Engineer,Wellington END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190502T173000 DTEND;TZID=Pacific/Auckland:20190502T193000 DTSTAMP:20190410T104327Z CREATED:20190410T104327Z LAST-MODIFIED:20190410T104327Z UID:3092-1556818200-1556825400@www.sesoc.org.nz SUMMARY:Rail Tunnel Refurbishment Following the November 2016 Kaikoura Earthquake DESCRIPTION:New Zealand Tunnelling Society (NZTS) are hosting the above presentation that may be of interest to you. \nPresented by Rafael Sierra Ballen\, KiwiRail. \nThursday\, 2 May 2019\nThe University of Auckland Engineering Campus\, Lecture Threatre 401.139 \nFrom a standing start\, following the largest ever recorded earthquake in New Zealand\, a highly committed collaborative team\, assessed the damage across twenty tunnels\, designed the repairs in view of future resilience\, and built a construction capability that delivered the works safely and on budget. Works trains were running again within 7 months\, and commercial services within 10 months. In doing so\, we reconnected communities at the top of New Zealand’s South Island. \nRafa will describe the logistical and technical challenges of refurbishing the rail tunnels in the context of the natural terrain hazards and landslides informed by his experiences of driving the quality and safety outcomes achieved. \nRafael Sierra Ballen has worked as a construction manager for over thirty years in South America\, the Middle East\, Asia\, Australia and New Zealand for major civil engineering projects as a tunnel design manager and a tunnel construction manager. \nThere will be an opportunity for refreshments and networking from 5.30pm\, with the presentation starting at 6pm. The event is free and will contribute to 1.5 hours of CPD. Registration is not required. \nPlease send any enquiries to Ross Roberts at ross.roberts@aucklandcouncil.govt.nz URL:https://www.sesoc.org.nz/event/rail-tunnel-refurbishment-following-the-november-2016-kaikoura-earthquake LOCATION:Eng Lect Theatre 401-439\, The University of Auckland\, Syomnds Street\, Auckland\, 20 Symonds Street\, Auckland\, New Zealand CATEGORIES:Auckland,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190502T173000 DTEND;TZID=Pacific/Auckland:20190502T190000 DTSTAMP:20190408T095413Z CREATED:20190408T095413Z LAST-MODIFIED:20190408T095413Z UID:3086-1556818200-1556823600@www.sesoc.org.nz SUMMARY:TWF meeting #2 DESCRIPTION:Date:          02 May 2019\, 5:30-7:00pm\nWhere:       Fulton Hogan Offices\n15 Sir William Pickering Dr\nBurnside\nChristchurch\nAgenda:     Presentations from Holmes\, RMD and Worksafe (TBC)\, followed by a workshop and networking.\nSponsor:      RMD (www.rmdnewzealand.co.nz)\nPlease register your attendance through Eventbrite. URL:https://www.sesoc.org.nz/event/twf-meeting-2 LOCATION:Fulton Hogan (Christchurch)\,  15 Sir William Pickering Dr\, Burnside\, Christchurch\, New Zealand CATEGORIES:Christchurch,Temporary Works Forum END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190430T123000 DTEND;TZID=Pacific/Auckland:20190430T170000 DTSTAMP:20190410T111048Z CREATED:20190410T111048Z LAST-MODIFIED:20190410T111048Z UID:3115-1556627400-1556643600@www.sesoc.org.nz SUMMARY:Simplified Lateral Mechanism Analysis (SLaMA) - Hamilton DESCRIPTION:This seminar provides guidance on the simplified lateral mechanism analysis (SLaMA) of existing buildings. The seminar aims to clarify the conceptual basis of how the approach can be used to assist in establishing the %NBS of a building. Two worked examples will be reviewed during the seminar\, making reference to relevant parts of the NZSEE detailed seismic assessment guidelines and a newly released set of guidelines for SLaMA. It is intended that practitioners inexperienced with the subject of seismic assessment will leave the seminar equipped with a better understanding of the SLaMA approach and valuable notes for later reference. \nDownload Registration form here\nSpeaker Profile\nTim Sullivan \nTim Sullivan is an Associate Professor at the University of Canterbury\, New Zealand. Prior to that he was based in Italy where he was head of the Design Methods Section of the European Centre for Training and Research in Earthquake Engineering\, and Assistant Professor at the University of Pavia. Tim’s research interests lie mainly in the examination of the fundamentals of seismic design and experimental testing techniques. He is particularly well recognised for his work in displacement-based seismic design and assessment methods\, with his PhD supervised by Nigel Priestley and Gian Michele Calvi. Tim has more than 100 publications related to seismic design\, seismic assessment\, seismic retrofit and mitigation of seismic risk. Tim is also a chartered professional engineer with the UK institute of Civil Engineers\, having worked in the UK\, New Zealand\, Germany and Italy on a wide range of building and bridge projects. \nBarry Davidson \nBarry has over thirty years’ experience in structural engineering\, design\, research and teaching. He has a wide-ranging background that includes the seismic retrofit of reinforced concrete and unreinforced masonry buildings and the design of damping and isolation systems to mitigate vibrations for buildings\, stairways and bridges. He taught and lead research into seismic design at the University of Auckland for over twenty years\, while remaining in contact with the design profession through his company\, Compusoft Engineering Ltd. He has played an active role in the profession\, where with the New Zealand Society of Earthquake Engineering\, he was part of the successful team that managed the 2000 World Conference in Earthquake Engineering\, he is a past President of and life member of SESOC. \nVenue\n\n\n\nQueenstown\nMonday 8 April 2019 \nCopthorne Hotel & Resort\, Cnr Frankton Rd & Adelaide St\, Queenstown\n\n\nChristchurch\nWednesday 10 April 2019 \nCommodore Airport Hotel\, \n449 Memorial Avenue\, Christchurch\n\n\nTaupo\nFriday 12 April 2019 \nWairakei Resort: 640 Wairakei Rd\, Taupo\n\n\nWellington\nMonday 15 April 2019 \nJames Cook Hotel Grand Chancellor: 147 The Terrace\, Wellington\n\n\nAuckland\nWednesday 17 April 2019 \nEllerslie Event Centre: Ascot Avenue (Ellerslie Racecourse)\, Greenlane\, Auckland\n\n\nNorth Harbour\nMonday 29 April 2019 \nQBE Stadium: Stadium Drive\, Albany\, Auckland\n\n\nHamilton\nTuesday 30 April 2019 \nClaudelands Event Centre: Brooklyn Road\, Hamilton\n\n\n\n  URL:https://www.sesoc.org.nz/event/simplified-lateral-mechanism-analysis-slama-hamilton CATEGORIES:Hamilton,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190429T123000 DTEND;TZID=Pacific/Auckland:20190429T170000 DTSTAMP:20190410T111006Z CREATED:20190410T111006Z LAST-MODIFIED:20190410T111006Z UID:3113-1556541000-1556557200@www.sesoc.org.nz SUMMARY:Simplified Lateral Mechanism Analysis (SLaMA) - North Harbour DESCRIPTION:This seminar provides guidance on the simplified lateral mechanism analysis (SLaMA) of existing buildings. The seminar aims to clarify the conceptual basis of how the approach can be used to assist in establishing the %NBS of a building. Two worked examples will be reviewed during the seminar\, making reference to relevant parts of the NZSEE detailed seismic assessment guidelines and a newly released set of guidelines for SLaMA. It is intended that practitioners inexperienced with the subject of seismic assessment will leave the seminar equipped with a better understanding of the SLaMA approach and valuable notes for later reference. \nDownload Registration form here\nSpeaker Profile\nTim Sullivan \nTim Sullivan is an Associate Professor at the University of Canterbury\, New Zealand. Prior to that he was based in Italy where he was head of the Design Methods Section of the European Centre for Training and Research in Earthquake Engineering\, and Assistant Professor at the University of Pavia. Tim’s research interests lie mainly in the examination of the fundamentals of seismic design and experimental testing techniques. He is particularly well recognised for his work in displacement-based seismic design and assessment methods\, with his PhD supervised by Nigel Priestley and Gian Michele Calvi. Tim has more than 100 publications related to seismic design\, seismic assessment\, seismic retrofit and mitigation of seismic risk. Tim is also a chartered professional engineer with the UK institute of Civil Engineers\, having worked in the UK\, New Zealand\, Germany and Italy on a wide range of building and bridge projects. \nBarry Davidson \nBarry has over thirty years’ experience in structural engineering\, design\, research and teaching. He has a wide-ranging background that includes the seismic retrofit of reinforced concrete and unreinforced masonry buildings and the design of damping and isolation systems to mitigate vibrations for buildings\, stairways and bridges. He taught and lead research into seismic design at the University of Auckland for over twenty years\, while remaining in contact with the design profession through his company\, Compusoft Engineering Ltd. He has played an active role in the profession\, where with the New Zealand Society of Earthquake Engineering\, he was part of the successful team that managed the 2000 World Conference in Earthquake Engineering\, he is a past President of and life member of SESOC. \nVenue\n\n\n\nQueenstown\nMonday 8 April 2019 \nCopthorne Hotel & Resort\, Cnr Frankton Rd & Adelaide St\, Queenstown\n\n\nChristchurch\nWednesday 10 April 2019 \nCommodore Airport Hotel\, \n449 Memorial Avenue\, Christchurch\n\n\nTaupo\nFriday 12 April 2019 \nWairakei Resort: 640 Wairakei Rd\, Taupo\n\n\nWellington\nMonday 15 April 2019 \nJames Cook Hotel Grand Chancellor: 147 The Terrace\, Wellington\n\n\nAuckland\nWednesday 17 April 2019 \nEllerslie Event Centre: Ascot Avenue (Ellerslie Racecourse)\, Greenlane\, Auckland\n\n\nNorth Harbour\nMonday 29 April 2019 \nQBE Stadium: Stadium Drive\, Albany\, Auckland\n\n\nHamilton\nTuesday 30 April 2019 \nClaudelands Event Centre: Brooklyn Road\, Hamilton\n\n\n\n  URL:https://www.sesoc.org.nz/event/simplified-lateral-mechanism-analysis-slama-north-harbour CATEGORIES:Auckland,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190417T160000 DTEND;TZID=Pacific/Auckland:20190417T180000 DTSTAMP:20190414T223459Z CREATED:20190414T223459Z LAST-MODIFIED:20190414T223459Z UID:3119-1555516800-1555524000@www.sesoc.org.nz SUMMARY:CSG meeting - EPB Methodology Dave Brunsdon DESCRIPTION:Date: Wednesday\, 17 April 2019\nTime: Presentation 4.00 pm to 6.00 pm\, networking & refreshments to follow\nVenue: University of Canterbury – James Hight Library – Undercroft room 101 \nThe EPB Methodology is the engine room of the new earthquake prone buildings system which came into force on 1 July 2017. The EPB Methodology provides the framework and rules for how potentially earthquake prone buildings are identified\, the scope and form of engineering assessments\, and criteria for how territorial authorities review and accept engineering assessments and decide on whether or not buildings are earthquake prone. It is essential that engineers undertaking seismic assessments for earthquake prone purposes have a good understanding of the provisions of the EPB Methodology – in particular\, what their assessments need to address and how they report their assessments to TAs. \nDave Brunsdon\, engineering adviser to MBIE’s Building System Assurance team\, will present the key points of the EPB Methodology for engineering practitioners. This will be a condensed version of the MBIE system training seminar delivered in August 2017\, but will explore additional aspects such as the treatment of interconnected buildings and use of the Assessment Summary Table template. URL:https://www.sesoc.org.nz/event/csg-meeting-epb-methodology-dave-brunsdon LOCATION:Undercroft Rm101\, University of Canterbury\, Puaka-James Height Building\, Ilam\, Christchurch\, 8041\, New Zealand CATEGORIES:Christchurch,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190417T080000 DTEND;TZID=Pacific/Auckland:20190417T170000 DTSTAMP:20190410T110915Z CREATED:20190410T110915Z LAST-MODIFIED:20190410T110915Z UID:3111-1555488000-1555520400@www.sesoc.org.nz SUMMARY:Simplified Lateral Mechanism Analysis (SLaMA) - Auckland DESCRIPTION:This seminar provides guidance on the simplified lateral mechanism analysis (SLaMA) of existing buildings. The seminar aims to clarify the conceptual basis of how the approach can be used to assist in establishing the %NBS of a building. Two worked examples will be reviewed during the seminar\, making reference to relevant parts of the NZSEE detailed seismic assessment guidelines and a newly released set of guidelines for SLaMA. It is intended that practitioners inexperienced with the subject of seismic assessment will leave the seminar equipped with a better understanding of the SLaMA approach and valuable notes for later reference. \nDownload Registration form here\nSpeaker Profile\nTim Sullivan \nTim Sullivan is an Associate Professor at the University of Canterbury\, New Zealand. Prior to that he was based in Italy where he was head of the Design Methods Section of the European Centre for Training and Research in Earthquake Engineering\, and Assistant Professor at the University of Pavia. Tim’s research interests lie mainly in the examination of the fundamentals of seismic design and experimental testing techniques. He is particularly well recognised for his work in displacement-based seismic design and assessment methods\, with his PhD supervised by Nigel Priestley and Gian Michele Calvi. Tim has more than 100 publications related to seismic design\, seismic assessment\, seismic retrofit and mitigation of seismic risk. Tim is also a chartered professional engineer with the UK institute of Civil Engineers\, having worked in the UK\, New Zealand\, Germany and Italy on a wide range of building and bridge projects. \nBarry Davidson \nBarry has over thirty years’ experience in structural engineering\, design\, research and teaching. He has a wide-ranging background that includes the seismic retrofit of reinforced concrete and unreinforced masonry buildings and the design of damping and isolation systems to mitigate vibrations for buildings\, stairways and bridges. He taught and lead research into seismic design at the University of Auckland for over twenty years\, while remaining in contact with the design profession through his company\, Compusoft Engineering Ltd. He has played an active role in the profession\, where with the New Zealand Society of Earthquake Engineering\, he was part of the successful team that managed the 2000 World Conference in Earthquake Engineering\, he is a past President of and life member of SESOC. \nVenue\n\n\n\nQueenstown\nMonday 8 April 2019 \nCopthorne Hotel & Resort\, Cnr Frankton Rd & Adelaide St\, Queenstown\n\n\nChristchurch\nWednesday 10 April 2019 \nCommodore Airport Hotel\, \n449 Memorial Avenue\, Christchurch\n\n\nTaupo\nFriday 12 April 2019 \nWairakei Resort: 640 Wairakei Rd\, Taupo\n\n\nWellington\nMonday 15 April 2019 \nJames Cook Hotel Grand Chancellor: 147 The Terrace\, Wellington\n\n\nAuckland\nWednesday 17 April 2019 \nEllerslie Event Centre: Ascot Avenue (Ellerslie Racecourse)\, Greenlane\, Auckland\n\n\nNorth Harbour\nMonday 29 April 2019 \nQBE Stadium: Stadium Drive\, Albany\, Auckland\n\n\nHamilton\nTuesday 30 April 2019 \nClaudelands Event Centre: Brooklyn Road\, Hamilton\n\n\n\n  URL:https://www.sesoc.org.nz/event/simplified-lateral-mechanism-analysis-slama-auckland CATEGORIES:Auckland,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190416T173000 DTEND;TZID=Pacific/Auckland:20190416T190000 DTSTAMP:20190410T103621Z CREATED:20190408T094913Z LAST-MODIFIED:20190410T103621Z UID:3082-1555435800-1555441200@www.sesoc.org.nz SUMMARY:Implementation of FRP Anchor Research in Seismic Strengthening - Prof. Scott Smith & Ravi Kanitkar DESCRIPTION:PRESENTATION: “From Research to Practice: Implementation of FRP Anchor Research in Seismic Strengthening” by Professor Scott Smith and Ravi Kanitkar \nWhen – 5.30pm – Tuesday 16th April 2019 \nWhere – Room: Eng 1401-401 (School of Engineering Building 401)\, University of Auckland. Access from Symonds Street (Refer attached City Campus Map) \nAgenda – \n17:30 pre-presentation refreshments \n18:00 presentation \nPlease register to attend this presentation by sending a blank email and RSVP only in the subject box to aucklandstructuralgroup@xtra.co.nz \nAbstract \nAs the use of externally bonded fibre-reinforced polymer (FRP) reinforcement (EBR) systems for the retrofit of existing concrete structures becomes more prevalent\, engineers and researchers are focusing on the use of FRP spike anchors to enhance the efficiency of EBR systems. This presentation focuses on the recent advances on the investigation of FRP anchors and describes how FRP anchors have been utilized in several field applications and the design of the anchors. The presentation offers a unique perspective that combines the academic and practicing engineering viewpoints. \nBiography \nScott Smith is Foundation Professor of Engineering and Dean of Engineering at Southern Cross University\, Australia\, and he has held these positions since 2013. His research interests encompass the application of advanced composite materials to civil infrastructure and he is Senior Vice President of the International Institute for FRP in Construction (IIFC). Scott is also an Editor for Construction and Building Materials and an Associate Editor of the Australian Journal of Civil Engineering. He holds fellowships with the International Institute for FRP in Construction\, Engineers Australia\, American Society of Civil Engineers\, and The Hong Kong Institution of Engineers. \nRavi Kanitkar has more than twenty years of experience in the design of new structures and the retrofit of existing structures. His focus has been on the solution of unique problems for a variety of structures\, ranging from seismic retrofit of existing buildings and bridges to the rehabilitation of infrastructure\, such as large diameter pipes and tanks\, which has been degraded due to environmental damage like corrosion. His interests include new technologies such as energy-dissipation for improving structural seismic performance and carbon fiber-reinforced polymers (CFRP) for strengthening existing structures. He is a voting member of the American Concrete Institute Committee 440 which writes the state-of-the-art design guides for the use of FRP in the United States. Ravi is a licensed engineer in several US states. Ravi has authored many publications dealing with the use of new technologies for rehabilitation of existing structures and has presented his work at conferences world-wide. URL:https://www.sesoc.org.nz/event/implementation-of-frp-anchor-research-in-seismic-strengthening-prof-scott-smith-ravi-kanitkar LOCATION:Eng Lect Theatre 401-401\, 20 Symonds Street\, Auckland\, New Zealand CATEGORIES:Auckland,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190415T123000 DTEND;TZID=Pacific/Auckland:20190415T170000 DTSTAMP:20190410T110811Z CREATED:20190410T110811Z LAST-MODIFIED:20190410T110811Z UID:3109-1555331400-1555347600@www.sesoc.org.nz SUMMARY:Simplified Lateral Mechanism Analysis (SLaMA) - Wellington DESCRIPTION:This seminar provides guidance on the simplified lateral mechanism analysis (SLaMA) of existing buildings. The seminar aims to clarify the conceptual basis of how the approach can be used to assist in establishing the %NBS of a building. Two worked examples will be reviewed during the seminar\, making reference to relevant parts of the NZSEE detailed seismic assessment guidelines and a newly released set of guidelines for SLaMA. It is intended that practitioners inexperienced with the subject of seismic assessment will leave the seminar equipped with a better understanding of the SLaMA approach and valuable notes for later reference. \nDownload Registration form here\nSpeaker Profile\nTim Sullivan \nTim Sullivan is an Associate Professor at the University of Canterbury\, New Zealand. Prior to that he was based in Italy where he was head of the Design Methods Section of the European Centre for Training and Research in Earthquake Engineering\, and Assistant Professor at the University of Pavia. Tim’s research interests lie mainly in the examination of the fundamentals of seismic design and experimental testing techniques. He is particularly well recognised for his work in displacement-based seismic design and assessment methods\, with his PhD supervised by Nigel Priestley and Gian Michele Calvi. Tim has more than 100 publications related to seismic design\, seismic assessment\, seismic retrofit and mitigation of seismic risk. Tim is also a chartered professional engineer with the UK institute of Civil Engineers\, having worked in the UK\, New Zealand\, Germany and Italy on a wide range of building and bridge projects. \nBarry Davidson \nBarry has over thirty years’ experience in structural engineering\, design\, research and teaching. He has a wide-ranging background that includes the seismic retrofit of reinforced concrete and unreinforced masonry buildings and the design of damping and isolation systems to mitigate vibrations for buildings\, stairways and bridges. He taught and lead research into seismic design at the University of Auckland for over twenty years\, while remaining in contact with the design profession through his company\, Compusoft Engineering Ltd. He has played an active role in the profession\, where with the New Zealand Society of Earthquake Engineering\, he was part of the successful team that managed the 2000 World Conference in Earthquake Engineering\, he is a past President of and life member of SESOC. \nVenue\n\n\n\nQueenstown\nMonday 8 April 2019 \nCopthorne Hotel & Resort\, Cnr Frankton Rd & Adelaide St\, Queenstown\n\n\nChristchurch\nWednesday 10 April 2019 \nCommodore Airport Hotel\, \n449 Memorial Avenue\, Christchurch\n\n\nTaupo\nFriday 12 April 2019 \nWairakei Resort: 640 Wairakei Rd\, Taupo\n\n\nWellington\nMonday 15 April 2019 \nJames Cook Hotel Grand Chancellor: 147 The Terrace\, Wellington\n\n\nAuckland\nWednesday 17 April 2019 \nEllerslie Event Centre: Ascot Avenue (Ellerslie Racecourse)\, Greenlane\, Auckland\n\n\nNorth Harbour\nMonday 29 April 2019 \nQBE Stadium: Stadium Drive\, Albany\, Auckland\n\n\nHamilton\nTuesday 30 April 2019 \nClaudelands Event Centre: Brooklyn Road\, Hamilton\n\n\n\n  URL:https://www.sesoc.org.nz/event/simplified-lateral-mechanism-analysis-slama-wellington CATEGORIES:Seminar,Wellington END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190412T123000 DTEND;TZID=Pacific/Auckland:20190412T170000 DTSTAMP:20190410T110706Z CREATED:20190410T110706Z LAST-MODIFIED:20190410T110706Z UID:3107-1555072200-1555088400@www.sesoc.org.nz SUMMARY:Simplified Lateral Mechanism Analysis (SLaMA) - Taupo DESCRIPTION:This seminar provides guidance on the simplified lateral mechanism analysis (SLaMA) of existing buildings. The seminar aims to clarify the conceptual basis of how the approach can be used to assist in establishing the %NBS of a building. Two worked examples will be reviewed during the seminar\, making reference to relevant parts of the NZSEE detailed seismic assessment guidelines and a newly released set of guidelines for SLaMA. It is intended that practitioners inexperienced with the subject of seismic assessment will leave the seminar equipped with a better understanding of the SLaMA approach and valuable notes for later reference. \nDownload Registration form here\nSpeaker Profile\nTim Sullivan \nTim Sullivan is an Associate Professor at the University of Canterbury\, New Zealand. Prior to that he was based in Italy where he was head of the Design Methods Section of the European Centre for Training and Research in Earthquake Engineering\, and Assistant Professor at the University of Pavia. Tim’s research interests lie mainly in the examination of the fundamentals of seismic design and experimental testing techniques. He is particularly well recognised for his work in displacement-based seismic design and assessment methods\, with his PhD supervised by Nigel Priestley and Gian Michele Calvi. Tim has more than 100 publications related to seismic design\, seismic assessment\, seismic retrofit and mitigation of seismic risk. Tim is also a chartered professional engineer with the UK institute of Civil Engineers\, having worked in the UK\, New Zealand\, Germany and Italy on a wide range of building and bridge projects. \nBarry Davidson \nBarry has over thirty years’ experience in structural engineering\, design\, research and teaching. He has a wide-ranging background that includes the seismic retrofit of reinforced concrete and unreinforced masonry buildings and the design of damping and isolation systems to mitigate vibrations for buildings\, stairways and bridges. He taught and lead research into seismic design at the University of Auckland for over twenty years\, while remaining in contact with the design profession through his company\, Compusoft Engineering Ltd. He has played an active role in the profession\, where with the New Zealand Society of Earthquake Engineering\, he was part of the successful team that managed the 2000 World Conference in Earthquake Engineering\, he is a past President of and life member of SESOC. \nVenue\n\n\n\nQueenstown\nMonday 8 April 2019 \nCopthorne Hotel & Resort\, Cnr Frankton Rd & Adelaide St\, Queenstown\n\n\nChristchurch\nWednesday 10 April 2019 \nCommodore Airport Hotel\, \n449 Memorial Avenue\, Christchurch\n\n\nTaupo\nFriday 12 April 2019 \nWairakei Resort: 640 Wairakei Rd\, Taupo\n\n\nWellington\nMonday 15 April 2019 \nJames Cook Hotel Grand Chancellor: 147 The Terrace\, Wellington\n\n\nAuckland\nWednesday 17 April 2019 \nEllerslie Event Centre: Ascot Avenue (Ellerslie Racecourse)\, Greenlane\, Auckland\n\n\nNorth Harbour\nMonday 29 April 2019 \nQBE Stadium: Stadium Drive\, Albany\, Auckland\n\n\nHamilton\nTuesday 30 April 2019 \nClaudelands Event Centre: Brooklyn Road\, Hamilton\n\n\n\n  URL:https://www.sesoc.org.nz/event/simplified-lateral-mechanism-analysis-slama-taupo CATEGORIES:Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190410T123000 DTEND;TZID=Pacific/Auckland:20190410T170000 DTSTAMP:20190410T110354Z CREATED:20190410T110354Z LAST-MODIFIED:20190410T110354Z UID:3095-1554899400-1554915600@www.sesoc.org.nz SUMMARY:Simplified Lateral Mechanism Analysis (SLaMA) Seminar (ChCh) DESCRIPTION:This seminar provides guidance on the simplified lateral mechanism analysis (SLaMA) of existing buildings. The seminar aims to clarify the conceptual basis of how the approach can be used to assist in establishing the %NBS of a building. Two worked examples will be reviewed during the seminar\, making reference to relevant parts of the NZSEE detailed seismic assessment guidelines and a newly released set of guidelines for SLaMA. It is intended that practitioners inexperienced with the subject of seismic assessment will leave the seminar equipped with a better understanding of the SLaMA approach and valuable notes for later reference. \nDownload Registration form here\nSpeaker Profile\nTim Sullivan \nTim Sullivan is an Associate Professor at the University of Canterbury\, New Zealand. Prior to that he was based in Italy where he was head of the Design Methods Section of the European Centre for Training and Research in Earthquake Engineering\, and Assistant Professor at the University of Pavia. Tim’s research interests lie mainly in the examination of the fundamentals of seismic design and experimental testing techniques. He is particularly well recognised for his work in displacement-based seismic design and assessment methods\, with his PhD supervised by Nigel Priestley and Gian Michele Calvi. Tim has more than 100 publications related to seismic design\, seismic assessment\, seismic retrofit and mitigation of seismic risk. Tim is also a chartered professional engineer with the UK institute of Civil Engineers\, having worked in the UK\, New Zealand\, Germany and Italy on a wide range of building and bridge projects. \nBarry Davidson \nBarry has over thirty years’ experience in structural engineering\, design\, research and teaching. He has a wide-ranging background that includes the seismic retrofit of reinforced concrete and unreinforced masonry buildings and the design of damping and isolation systems to mitigate vibrations for buildings\, stairways and bridges. He taught and lead research into seismic design at the University of Auckland for over twenty years\, while remaining in contact with the design profession through his company\, Compusoft Engineering Ltd. He has played an active role in the profession\, where with the New Zealand Society of Earthquake Engineering\, he was part of the successful team that managed the 2000 World Conference in Earthquake Engineering\, he is a past President of and life member of SESOC. \nVenue\n\n\n\nQueenstown\nMonday 8 April 2019 \nCopthorne Hotel & Resort\, Cnr Frankton Rd & Adelaide St\, Queenstown\n\n\nChristchurch\nWednesday 10 April 2019 \nCommodore Airport Hotel\, \n449 Memorial Avenue\, Christchurch\n\n\nTaupo\nFriday 12 April 2019 \nWairakei Resort: 640 Wairakei Rd\, Taupo\n\n\nWellington\nMonday 15 April 2019 \nJames Cook Hotel Grand Chancellor: 147 The Terrace\, Wellington\n\n\nAuckland\nWednesday 17 April 2019 \nEllerslie Event Centre: Ascot Avenue (Ellerslie Racecourse)\, Greenlane\, Auckland\n\n\nNorth Harbour\nMonday 29 April 2019 \nQBE Stadium: Stadium Drive\, Albany\, Auckland\n\n\nHamilton\nTuesday 30 April 2019 \nClaudelands Event Centre: Brooklyn Road\, Hamilton\n\n\n\n  URL:https://www.sesoc.org.nz/event/simplified-lateral-mechanism-analysis-slama-seminar-chch CATEGORIES:Christchurch,Seminar END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190403T173000 DTEND;TZID=Pacific/Auckland:20190403T200000 DTSTAMP:20190319T031738Z CREATED:20190319T031738Z LAST-MODIFIED:20190319T031738Z UID:3066-1554312600-1554321600@www.sesoc.org.nz SUMMARY:ESE Auckland - Case Example in Reinforced Concrete Design – Complex Components DESCRIPTION:SESOC Emerging Structural Engineers Network invite you to the above presentation being delivered in Auckland in April. \nWednesday 3 April 2019\nUniversity of Auckland – Faculty of Science\, 302-G20\nNetworking from 5.30pm\, Presentation from 6pm followed by food and drinks \nPresented By Andrew Thompson – Technical Director at Holmes Consulting. \n\n\n\nPlease RSVP\n\n\n\n\n\n\n\n\n\n\nThis event will use a case example to showcase a range of interacting behaviours\, design considerations and staging issues in concrete component design – illustrating a few of the key skills expected of a competent design engineer in reinforced concrete design. \nThe case example used will be the design of a series of conventional (non post- tensioned) reinforced concrete transfer beams in the Commercial Bay development. The transfer beams span over the CRL tunnel\, and are used to support basement structure and columns from parts of both steel framed and concrete framed buildings above\, which form part of the low rise retail component of the development. Whilst the example chosen may be a seemingly innocuous part of a project which delivered numerous greater challenges elsewhere\, it is a convenient way to step through a few different aspects of reinforced concrete design. This includes: \n\nWhat are “deep beams”?\nConventional plane sections bending/shear theory\, versus strut and tie\nSeismic design actions (including SESOC guidance recommendations)\nComposite sections (for unpropped construction)\nCalculation of deflection\nConsideration of shrinkage and creep\nStaged construction considerations (and how these considerations differ in concrete and steel construction)\nPour sequencing and pour methodology for flatness and levelness\nManagement of sensitivity/uncertainty\nCrack control from applied loads\nEarly age and thermal cracking in concrete\nRoles and responsibilities in design and construction\, and communication\n\nOpportunities will be taken where possible to touch on some of the wider applications of the above considerations (beyond the case example)\, and the literature/methods available to tackle them. It is hoped that attendees will leave with an enhanced awareness of potential considerations required in areas of reinforced concrete design\, other than seismic. URL:https://www.sesoc.org.nz/event/ese-auckland-case-example-in-reinforced-concrete-design-complex-components LOCATION:302-G20\, Faculty of Science\, The University of Auckland\, 23 Symonds Street\, Auckland\, 1010\, New Zealand CATEGORIES:Auckland,Emerging Structural Engineer END:VEVENT BEGIN:VEVENT DTSTART;TZID=Pacific/Auckland:20190327T173000 DTEND;TZID=Pacific/Auckland:20190327T193000 DTSTAMP:20190319T030024Z CREATED:20190319T030024Z LAST-MODIFIED:20190319T030024Z UID:3063-1553707800-1553715000@www.sesoc.org.nz SUMMARY:ESE Network – Christchurch Launch – “Things I learnt the hard way” DESCRIPTION:SESOC is excited to announce the launch of the Emerging Structural Engineers Network in Christchurch\, following a successful kickoff in Auckland. \nWednesday 27 March\nWSP Opus\, Level 4\, 12 Moorhouse Avenue\, Addington\, Christchurch\n5.30pm networking and drinks for 6pm start \nThe Christchurch launch will be held on the 27th of March and features a panel of speakers from a range of experience levels in the structural engineering industry. Whether it be technical challenges in design or construction projects\, building relationships with clients and colleagues or the development of professional skills\, the transition from university student to professional engineer can be tough – come and learn from the experiences of those that have been there as our panellists share their “things I learnt the hard way”. \nAfter the panel session and questions\, stay for a tipple and a bite\, and a chat with some like-minded structural engineers. \nOur three panelists are: \nChris Burrell-Smith\nChris is a Chartered Professional Structural engineer and an associate and shareholder with Richards Consulting Engineers. Chris started his career in Christchurch just after the Darfield 2010 earthquake and was fully involved in the assessment and remediation of damaged educational\, commercial and residential structures from the start of his career. He has since worked on a variety of structural projects\, working closely with architects\, developers\, local authorities\, and home owners. Chris has focused on ensuring that the solutions produced are appropriate for the client and project requirements. Chris now manages the technical systems and training for 10 other engineers. \nHelen Trappitt\nHelen is a structural engineer\, director and shareholder at Lewis Bradford Consulting Engineers based in Christchurch. Since graduating from the University of Canterbury with BE(Hons) in 2000\, she has gone on to become a member of the Industry Advisory Board for the University of Canterbury Civil and Natural Resources Engineering department. Helen specialises in the seismic strengthening of heritage buildings and has experience in this sector both before and after the Canterbury earthquake sequence. This led to her appointment as a Director of Christ Church Cathedral Reinstatement Ltd in 2018. Recently Helen was awarded the Engineering New Zealand Canterbury Branch Award for Excellence in Service to the Community\, which recognised her pro bono work with Gap Filler\, CoCA\, FESTA\, SCAPE Public Art and promoting engineering careers in girls’ schools. \nScott Davies-Colley\nA design Engineer with Holmes Consulting in Christchurch\, Scott arrived at the University of Canterbury to start his engineering degree the week of the February 2011 Canterbury earthquake. The subsequent rebuild in Christchurch has formed a large part of his engineering career. With the immense extent of work required for the rebuild of a city\, Scott has had opportunities to work on a vast array of projects. These have included heritage URM buildings\, green field site projects such as Rolleston Secondary School and recently a new multi-storey low damage base isolated office building at 2 Cathedral Square. This has provided an opportunity to see projects through the complete process\, from concept design to completion of construction. \nFourth speaker will be confirmed shortly. \nFollow the link below to RSVP to the event: \n  \nhttps://goo.gl/forms/pQ4gcdYb7vtXeXOl2 URL:https://www.sesoc.org.nz/event/ese-network-christchurch-launch-things-i-learnt-the-hard-way LOCATION:WSP OPUS\, Level 4\, 12 Moorhouse Avenue\, Christchurch\, New Zealand CATEGORIES:Christchurch,Emerging Structural Engineer END:VEVENT END:VCALENDAR